Automatic and Systematic Methodology for Test Packet Generation
Main Article Content
Abstract
As of late systems are becoming wide and more complex. In any case, managers use devices like ping and trace route to investigate issues. Consequently, we proposed a programmed and Systematic methodology for testing and investigating systems called Automated Test Packet Generation (ATPG). This methodology gets switch designs and creates a device autonomous model. ATPG create a couple set of Packet Generation to discover each connection in the system. Test bundles are sent as often as possible and it recognize disappointments to limit the issue. ATPG can distinguish both practical and execution (throughput, inertness) issues. We found, less number of Packet Generation is sufficient to test all principles in systems. For case, 4000 parcels can cover all tenets in Stanford spine system while 53 are sufficiently much to cover all connections
Article Details
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
IJCERT Policy:
The published work presented in this paper is licensed under the Creative Commons Attribution 4.0 International (CC BY 4.0) license. This means that the content of this paper can be shared, copied, and redistributed in any medium or format, as long as the original author is properly attributed. Additionally, any derivative works based on this paper must also be licensed under the same terms. This licensing agreement allows for broad dissemination and use of the work while maintaining the author's rights and recognition.
By submitting this paper to IJCERT, the author(s) agree to these licensing terms and confirm that the work is original and does not infringe on any third-party copyright or intellectual property rights.
References
Hongyi Zeng, Peyman Kazemian, George Varghese, ACM, and Nick McKeown, ACM,“Automatic Test Packet Generation”.
M. Jain, C. Dovrolis,“End-to-end available bandwidth: Measurement methodology, dynamics, and relation with TCP throughput”, IEEE/ACM Trans. Netw., Vol. 11, No. 4, pp. 537–549, Aug. 2003.
Kompella, R. R., Greenberg, A., Rexford, J., Snoeren, A. C., Yates, J. Cross-layer Visibility as a Service", In Proc. of fourth workshop on Hot Topics in Networks (HotNet-IV) (2005)
D. Maltz, G. Xie, J. Zhan, H. Zhang, G. Hjalmtysson, A. Greenberg,"Routing design in operational networks: A look from the inside", In Proc. ACM SIGCOMM, 2004.
Mark Stemm, Randy Katz, Srinivasan Seshan,“A network measurement architecture for adaptive applications”, In Proceedings of the nineteenth Annual Joint Conference of the IEEE Computer and Communications Societies, pp. 285 - 294, 2000.
Verma, D.,"Simplifying Network Administration using Policy based Management".
P. Yalagandula, P. Sharma, S. Banerjee, S. Basu, S.-J. Lee, “S3: A scalable sensing service for monitoring large networked systems".
Thomas H. Cormen, Charles E. Leiserson, Ronald L. Rivest,"Introduction To Algorithms", Eastern Economy Edition.New Delhi: Prentice-Hall of India Private Limited 1998.
E Balagurusamy,"Programming in ANSI C", Second edition. New Delhi: Tata McGraw-Hill, 1997.
Deitel & Deitel, C++ How To Program, Second Edition, New Jersey, NJ Prentice Hall, 1997
Tom Christiansen, Nathn Torkington,"Perl Cookbook: Solutions and Examples For Perl Programmers", 1st Edition, Sebastopol, CA: O’Reilly & Associates, Inc., 1999.
Nathan Patwardhan, Ellen Siever and Stephen Spainhour, PERL In A Nutshell, 2nd Edition, Sebastopol, CA: O’Reilly & Associates, Inc., 2002.
Tom Milligan, “Using Perl With Rational ClearCase Automation Library”, 2004Retrieved from Nov10, 2010