A Survey on Fault Identification Using Automatic Test Packet Generation
Main Article Content
Abstract
In recent times networks are increasing wide and more compound. Yet administrator use tools like ping and sketch route to repair problems. Consequently we proposed a Usual and systematic approach for testing and debugging system called Automatic Test Packet Creation. This loom gets router configurations and generates a machine-independent model. ATPC generate a few set of test packets to find every link in the network. Test packets are forwarded frequently and it notice failures to pinpoint the fault. ATPC can detect both functional and feat (throughput, latency) problems. We found, less number of test packets is enough to assessment all rules in networks. For paradigm, 5000 packets can cover all rules in Stanford backbone network, while 63 are much enough to cover all links.
Article Details
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
IJCERT Policy:
The published work presented in this paper is licensed under the Creative Commons Attribution 4.0 International (CC BY 4.0) license. This means that the content of this paper can be shared, copied, and redistributed in any medium or format, as long as the original author is properly attributed. Additionally, any derivative works based on this paper must also be licensed under the same terms. This licensing agreement allows for broad dissemination and use of the work while maintaining the author's rights and recognition.
By submitting this paper to IJCERT, the author(s) agree to these licensing terms and confirm that the work is original and does not infringe on any third-party copyright or intellectual property rights.
References
Hongyi Zeng, Member, IEEE, Peyman Kazemian, Member, IEEE, George Varghese, Member, IEEE, Fellow, ACM, and Nick McKeown, Fellow, IEEE, ACM, “Automatic Test Packet Generation”.
M. Jain and C. Dovrolis, “End-to-end available bandwidth: Measurement methodology, dynamics, and relation with TCP throughput,” IEEE/ACM Trans. Netw., vol. 11, no. 4, pp. 537–549, Aug. 2003.
Kompella, R. R., Greenberg, A., Rexford, J., Snoeren, A. C., and Yates, J. Cross-layer Visibility as a Service. In Proc. Of fourth workshop on Hot Topics in Networks (HotNet-IV) (2005).
D. Maltz, G. Xie, J. Zhan, H. Zhang, G. Hjalmtysson, and A. Greenberg. Routing design in operational networks: A look from the inside. In Proc. ACM SIGCOMM, 2004.
Mark Stemm, Randy Katz, Srinivasan Seshan, “A network measurement architecture for adaptive applications”, In Proceedings of the nineteenth Annual Joint Conference of the IEEE Computer and Communications Societies, pp. 285 - 294, 2000.
Verma, D. Simplifying Network Administration using Policy based Management. IEEE Network Magazine (March 2002).
P. Yalagandula, P. Sharma, S. Banerjee, S. Basu, and S.-J. Lee, “S3: A scalable sensing service for monitoring large networked systems,” in Proc. INM, 2006, pp. 71– 76