Impact Factor:6.549
 Scopus Suggested Journal: UNDER REVIEW for TITLE INCLUSSION

International Journal
of Computer Engineering in Research Trends (IJCERT)

Scholarly, Peer-Reviewed, Open Access and Multidisciplinary

Welcome to IJCERT

International Journal of Computer Engineering in Research Trends. Scholarly, Peer-Reviewed,Open Access and Multidisciplinary

ISSN(Online):2349-7084                 Submit Paper    Check Paper Status    Conference Proposal

Back to Current Issues

Novel Decoupling Design for Voltage Control of Wind-Driven IG System

M.Tech Research Scholar, Priyadarshini Institute of Technology & Management
Associate Professor, Priyadarshini Institute of Technology & Management

This paper addresses a systematic approach based on Eigen structure assignment to determine the mode shape and transient response of a STATCOM utilized as an exciter for induction generators (IG). A physical control scheme, including four control loops: ac voltage, dc voltage, ac active current and ac reactive current controllers, is pre-specified for the STATCOM. A synthetic algorithm is proposed to embed these physical control loops in the output feedback path. With appropriate oscillation mode design (Eigen structure) in each state variable, the STATCOM active current and reactive current will no longer be governed by the same mode but driven by new respective modes. The simulation and experimental results demonstrated that under various system disturbances, the proposed mode decoupling STATCOM is effective in regulating IG terminal voltage.

V. SRIKANTH REDDY,G. RAVI KUMAR."Novel Decoupling Design for Voltage Control of Wind-Driven IG System". International Journal of Computer Engineering In Research Trends (IJCERT) ,ISSN:2349-7084 ,Vol.1, Issue 06,pp.592-596, DECEMBER - 2014, URL :,

Keywords : Eigen structure assignment, induction generator (IG), static synchronous compensator (STATCOM), voltage- sourced inverter (VSI).

[1]. E. S. Abdin and W. Xu, “Control design and
dynamic performance analysis of a wind turbine
induction generator unit,” IEEE Trans. Energy
Convers., vol. 15, no. 1, pp. 91–96, 2000.
[2]. R. Cardenas, R. Pena, G. Asher, and J. Clare,
“Control strategies for enhanced power smoothing
in wind energy systems using a flywheel driven by
a vector-controlled induction machine,” IEEE Trans.
Ind. Electron. vol. 48, no. 3, pp. 625–635, 2001.
[3]. G. O. Cimuca, C. Saudemont, B. Robyns, and M.
M. Radulescu, “Control and performance
evaluation of a flywheel energy-storage system
associated to a variable-speed wind generator,”
IEEE Trans. Ind. Electron., vol. 53, no. 4, pp. 1074–
1085, 2006.
[4]. E. G. Marra and J. A. Pomilio, “Inductiongenerator-based system pro- viding regulated voltage with constant frequency,” IEEE Trans. Ind.
Electron., vol. 47, no. 4, pp. 908–914, 2000.
[5]. W. L. Chen, Y.-H. Lin, H.-S. Gau, and C.-H. Yu,
“STATCOM controls for a self-excited induction
generator feeding random load,” IEEE Trans. Power
Del., vol. 23, no. 4, pp. 2207–2215, 2008.
[6]. W. L. Chen and Y. Y. Hsu, “Controller design
for an induction generator driven by a
variablespeed wind turbine,” IEEE Trans. Energy
Convers., vol. 21, no. 3, pp. 625–635, 2006.
[7]. N. S. Wani and W. Z. Gandhare, “Voltage
Recovery of Induction Generator using Indirect
Torque Control Method”, International Journal of
Electrical Engineering & Technology (IJEET),
Volume 3, Issue 3, 2012, pp. 146 - 155, ISSN Print :
0976-6545, ISSN Online: 0976-6553.
[8]. Ameer H. Abd and D.S.Chavan, “Impact of
Wind Farm of Double-Fed Induction Generator
(Dfig) on Voltage Quality”, International Journal of
Electrical Engineering & Technology (IJEET),
Volume 3, Issue 1, 2012, pp. 235 - 246, ISSN Print :
0976-6545, ISSN Online: 0976- 6553.
[9]. Youssef A. Mobarak, “Svc, Statcom, and
Transmission Line Rating Enhancments on
Induction Generator Driven by Wind Turbine”,
International Journal of Electrical Engineering &
Technology (IJEET), Volume 3, Issue 1, 2012, pp. 326
- 343, ISSN Print : 0976-6545, ISSN Online: 0976-


Download :

Refbacks : Currently there are no Refbacks


Authors are not required to pay any article-processing charges (APC) for their article to be published open access in Journal IJCERT. No charge is involved in any stage of the publication process, from administrating peer review to copy editing and hosting the final article on dedicated servers. This is free for all authors. 

News & Events

Latest issue :Volume 10 Issue 1 Articles In press

A plagiarism check will be implemented for all the articles using world-renowned software. Turnitin.

Digital Object Identifier will be assigned for all the articles being published in the Journal from September 2016 issue, i.e. Volume 3, Issue 9, 2016.

IJCERT is a member of the prestigious.Each of the IJCERT articles has its unique DOI reference.
DOI Prefix : 10.22362/ijcert

IJCERT is member of The Publishers International Linking Association, Inc. (“PILA”)

Emerging Sources Citation Index (in process)

IJCERT title is under evaluation by Scopus.

Key Dates

☞   LAST DATE OF SUBMISSION : 31st March 2023
In 7 Days

Important Announcements

All the authors, conference coordinators, conveners, and guest editors kindly check their articles' originality before submitting them to IJCERT. If any material is found to be duplicate submission or sent to other journals when the content is in the process with IJCERT, fabricated data, cut and paste (plagiarized), at any stage of processing of material, IJCERT is bound to take the following actions.
1. Rejection of the article.
2. The author will be blocked for future communication with IJCERT if duplicate articles are submitted.
3. A letter regarding this will be posted to the Principal/Director of the Institution where the study was conducted.
4. A List of blacklisted authors will be shared among the Chief Editors of other prestigious Journals
We have been screening articles for plagiarism with a world-renowned tool: Turnitin However, it is only rejected if found plagiarized. This more stern action is being taken because of the illegal behavior of a handful of authors who have been involved in ethical misconduct. The Screening and making a decision on such articles costs colossal time and resources for the journal. It directly delays the process of genuine materials.

Citation Index

Citations Indices All
Citations 1026
h-index 14
i10-index 20
Source: Google Scholar

Acceptance Rate (By Year)

Acceptance Rate (By Year)
Year Rate
2021 10.8%
2020 13.6%
2019 15.9%
2018 14.5%
2017 16.6%
2016 15.8%
2015 18.2%
2014 20.6%

Important Links

Conference Proposal