Back to Current Issues

DVR Scheme for Recompense of Voltage Sags, State-of-The-Art Review

B. GOPAIAH, G. RAVI KUMAR, , ,

Affiliations
M.Tech Research Scholar, Priyadarshini Institute of Technology & Management
Associate Professor, Priyadarshini Institute of Technology & Management

:NOT ASSIGNED

Abstract

The problem of voltage sags and its severe impact on sensitive loads is well known. To solve this problem, The DVR is a modern and important custom power device for compensation voltage sags in power distribution systems. The Dynamic Voltage Restorer (DVR) is fast, flexible and efficient solution to voltage sag problem. The DVR is a series compensator used to mitigate voltage sags and to restore load voltage to its rated value. In this paper, an overview of the DVR, its functions, configurations, components, operating modes, voltage injection methods and closed -loop control of the DVR output voltage are reviewed along with the device capabilities and limitations.

Citation

B. GOPAIAH,G. RAVI KUMAR."DVR Scheme for Recompense of Voltage Sags, State-of-The-Art Review". International Journal of Computer Engineering In Research Trends (IJCERT) ,ISSN:2349-7084 ,Vol.1, Issue 06,pp.513-519, DECEMBER - 2014, URL :https://ijcert.org/ems/ijcert_papers/V1I624.pdf,

Keywords : Power Quality, Voltage Sag, Dynamic Voltage Restorer (DVR), Control Strategy, Voltage Source Converter

References

[1] M. Izhwan M, N. Mariun, and M. Amran M. Radzi,
“The effect of Power Quality to the industries”, The
5th SCORED, Dec. 2007,Malaysia, pp. 1- 4.
[2] R. Ibrahim, A. M. Haidar, M. Zahim “The Effect of
DVR Location for Enhancing Voltage Sag”
Proceedings of the 9th WSEAS International
Conference on A pplications of Electrical Engineering,
pp. 92-98.
[3] P. T. Nguyen, Tapan. K. Saha, “Dynamic Voltage
Restorer against Balanced and Unbalanced Voltage
Sags: Modelling and Simulation,” IEEE Power
Engineering Society General Meeting, vol. 1, pp. 639-
644, June 2004.
[4] E. Babaei, M. F. Kangarlu,”A New Topology for
Dynamic Voltage Restorers without dc Link” IEEE
Symposium on Industrial Electronics and
Applications (ISIEA 2009), October 4-6, 2009, Kuala
Lumpur, Malaysia.
[5] V. S. Mallela, P. S. Solanki, and A. Chaturvedi
“Role of a Dynamic Voltage Restorer in Mitigation of
Power Quality Problems”International Conference on
Communication, Computer & Power (ICCCP'05), Feb.
2005, pp. 161- 166.
[6] P. Boonchiam, and N. Mithulananthan
“Understanding of Dynamic Voltage Restorers
through MATLAB Simulation” Thammasat I nt. J.
Sc.Tech., Vol. 11, No. 3, pp. 1-6, July-September 2006.
[7] C. Benachaiba, and B. Ferdi “Voltage quality
improvement using DVR”, Electrical Power Quality
and Utilization, Journal Vol. XIV,No. 1, pp. 39-45,
2008.
[8] M. F. Kangarlu, S. H. Hosseini, A. K. Sadigh
“Transformerless DVR topology based on multilevel
inverter with reduced number of switches” 1st Power
Electronic & Drive Systems & Technologies
Conference,IEEE,pp. 371-375,2010
[9] P. Roncero-Sánchez, E. Acha, J. E. Ortega-Calderon
Vicente Feliu, A. García-Cerrada, “A versatile control
scheme for a dynamic voltage restorer for powerquality improvement”, IEEE Trans., Power Del., vol.
24, no. 1, pp. 277-284, Jan. 2009.
[10] R.Omar, and N.A.Rahim “power quality
improvement in low voltage distribution system using
dynamic voltage restorer (DVR)”Industrial Electronics
and Applications (ICIEA), 2010 the 5th IEEE
Conference, pp. 973-978, 2010.
[11] R.Omar, N. A. Rahim, and M. Sulaiman “New
control technique applied in dynamic voltage restorer
for voltage sag mitigation”,American J. of Engineering
and Applied Sciences 3 (1): pp.42-48, 2010.
[12] P. R. Sanchez, and E. Acha “Dynamic voltage
restorer based on flying capacitor multilevel
converters operated by repetitive control”,IEEE
Transactions on power delivery, Vol.24, No.2, pp. 951-
960, April 2009.
[13] R. Amrita, and A. K. Nadir “Modeling &
Simulation of dynamic voltage restorer (DVR) forenhancing voltage sag”, Sensors & Transducers
Journal, Vol. 87, Issue 1, January 2008, pp. 85-93, 2008.
[14] R. Omar, and N. A. Rahim “Modeling and
simulation for voltage sags/swells mitigation using
dynamic voltage restorer (DVR)”,Power Engineering
Conference, 2008. AUPEC '08. Dec.2008, pp. 1-5.
[15] M. A. Bhaskar, S. S. Dash, C. Subramani, M. J.
Kumar, P. R. Giresh, M. V. Kumar “Voltage quality
improvement using DVR”, 2010 International
Conference on Recent Trends in Information,
Telecommunication and Computing, pp. 378-380,
IEEE,2010.
[16] Wang Kai, “Analysis of a dynamic voltage
regulator”, Master of Science Thesis. Stockholm,
Sweden 2009, XR-EE-EME 2009:010.
[17] A. Almeida, L. Moreira, J. Delgado, “Power
quality problems and new solutions”, The electrical
and computer engineering,pp. 1-9,2003.
[18] M. V. Kasuni Perera, “Control of a dynamic
voltage restorer to compensate single phase voltage
sags” Master of Science Thesis, KTH Electrical
Engineering, Stockholm, Sweden, 2007.
[19] Ray Arnold “Solutions to Power Quality
Problems” power engineering journal pages: 65-73.
2001.
[20] T. Devaraju, V. C. Veera Reddy, and M. V. Kumar
“Role of custom power devices in power quality
enhancement: A Review”,International Journal of
Engineering Science and Technology, Vol.2 (8), 2010,
pp. 3628-3634.

DOI Link : NOT ASSIGNED

Download :

V1I624.pdf

Refbacks : Currently there are no Refbacks

Support Us

IJCERT is peer-reviewed scientific Research journal to endorse conservation. We have not put up a paywall to readers, But running a monthly journal costs is a lot. IJCERT has been changed the publication policy from Free publication to pay because of increasing the maintenance cost and other editorial charges. The understanding and cooperation of the author are highly solicited.we still need support to keep the journal flourishing. If our readers help fund it, our future will be more secure.