International Journal of Computer Engineering in Research Trends

Back to Current Issues

A Novel Design for Encoding and Decoding to Minimize Crosstalk in VLSI Circuits

J.Prema, Akash Venkatachalam, , ,

Affiliations
M.Tech
B.Tech SRM UNIVERSITY

:NOT ASSIGNED

Abstract

In the developing world much know-how are growing faster and faster as they are becoming reduced, one such is the very large scale integrated design-VLSI. Many trials are faced in VLSI, among them is the crosstalk frequency. Global buses in deep-submicron (DSM) system-on-chip designs Ingest noteworthy extents of power, have large transmission interruptions and are prone to errors due to DSM noise-crosstalk. Owing to this, crosstalk manifestation on long on-chip buses is progressively becoming a limiting factor in high-speed designs. Crosstalk among nearby wires on the bus may create a remarkable portion of the transmission delay. Placing a guard wire between each signal wire assuages the crosstalk problem but doubles the area used by the bus, which is an objectionable concern. Instead, it is proposed to employ data encoding and decoding for special codes called boundary shift codes to abate crosstalk inside a bus.

Citation

J.Prema,Akash Venkatachalam."A Novel Design for Encoding and Decoding to Minimize Crosstalk in VLSI Circuits". International Journal of Computer Engineering In Research Trends (IJCERT) ,ISSN:2349-7084 ,Vol.2, Issue 11,pp.842-848, December- 2015, URL :https://ijcert.org/ems/ijcert_papers/V2I1206.pdf,

Keywords : VLSI, Deep-Submicron (DSM) system, Crosstalk, Hamming code, Encoder and Decoder

References

[1] Victor, B. and K. Keutzer, â€šBus encoding to prevent crosstalk delayâ€›. Proc. IEEE/ACM Intl. Conf. on Computer Aided Design, pp: 57-69. 2001.
 [2] Ketann, Patel AndIgorl and Marko, â€šError-correction and crosstalk avoidance in DSM bussesâ€›.
 [3] Sainarayanan, K.S., C. Raghunandan, Ravindra and J.V.R. Srinivas, â€šBus coding to minimize redundant bit transitionsâ€› M.B. TENCON. 2007.
 [4] Saravanan, T. and R. Udayakumar, â€šComparison of Different Digital Image watemarking techniquesâ€›, MiddleEast Journal of Scientific Research, ISSN:1990-9233, 15(12): 1684-1690. 2013.
 [5] Saravanan, T. and R. Udayakumar, â€šOptimization of Machining Hybrid Metal matrix Composites using desirability analysisâ€›, Middle-East Journal of Scientific Research, ISSN: 1990-9233,15(12): 1691-1697. 2013. 
[6] Saravanan, T. and R. Udayakumar, â€šSimulation Based line balancing of a single piece flow lineâ€›, Middle-East Journal of Scientific Research, ISSN:1990-9233, 15(12): 1698-1701. 2013 
[7] Saravanan, T. and R. Udayakumar, â€šComparison of Different Digital Image watemarking techniquesâ€›, MiddleEast Journal of Scientific Research, ISSN:1990-9233, 15(12): 1684-1690. 2013.

DOI Link : NOT ASSIGNED

Download :

V2I1206.pdf

Refbacks : Currently there are no Refbacks

Announcements

Authors are not required to pay any article-processing charges (APC) for their article to be published open access in Journal IJCERT. No charge is involved in any stage of the publication process, from administrating peer review to copy editing and hosting the final article on dedicated servers. This is free for all authors.

News & Events

Latest issue :Volume 10 Issue 1 Articles In press

A plagiarism check will be implemented for all the articles using world-renowned software. Turnitin.

Digital Object Identifier will be assigned for all the articles being published in the Journal from September 2016 issue, i.e. Volume 3, Issue 9, 2016.

IJCERT is a member of the prestigious.Each of the IJCERT articles has its unique DOI reference.
DOI Prefix : 10.22362/ijcert

IJCERT is member of The Publishers International Linking Association, Inc. (“PILA”)

Emerging Sources Citation Index (in process)

IJCERT title is under evaluation by Scopus.

Key Dates

☞ INVITING SUBMISSIONS FOR THE NEXT ISSUE :

☞ LAST DATE OF SUBMISSION : 31st March 2023

☞ SUBMISSION TO FIRST DECISION : In 7 Days

☞ FINAL DECISION : IN 3 WEEKS FROM THE DAY OF SUBMISSION

Important Announcements

All the authors, conference coordinators, conveners, and guest editors kindly check their articles' originality before submitting them to IJCERT. If any material is found to be duplicate submission or sent to other journals when the content is in the process with IJCERT, fabricated data, cut and paste (plagiarized), at any stage of processing of material, IJCERT is bound to take the following actions.
1. Rejection of the article.
2. The author will be blocked for future communication with IJCERT if duplicate articles are submitted.
3. A letter regarding this will be posted to the Principal/Director of the Institution where the study was conducted.
4. A List of blacklisted authors will be shared among the Chief Editors of other prestigious Journals
We have been screening articles for plagiarism with a world-renowned tool: Turnitin However, it is only rejected if found plagiarized. This more stern action is being taken because of the illegal behavior of a handful of authors who have been involved in ethical misconduct. The Screening and making a decision on such articles costs colossal time and resources for the journal. It directly delays the process of genuine materials.

Citation Index

Citations Indices	All
Citations	1026
h-index	14
i10-index	20
Source: Google Scholar

Acceptance Rate (By Year)

Acceptance Rate (By Year)
Year	Rate
2021	10.8%
2020	13.6%
2019	15.9%
2018	14.5%
2017	16.6%
2016	15.8%
2015	18.2%
2014	20.6%

 Conference Proposal

 Peer Review

 Digital Library

 Register here

 Conference Proposal

 Special Issue Proposal

 Conference Proposal Guidelines

 Upcoming Conference

DOI:10.22362/ijcert

Welcome to IJCERT