International Journal of Computer Engineering in Research Trends

Back to Current Issues

A Survey on Fault Identification Using Automatic Test Packet Generation

L.Sravanthi, B.RanjithKumar, , ,

Affiliations
M.Tech (CSE), Priyadarshini Institute of Technology & Science for womenâ€™s
Associate Professor ( Dept.of CSE), Priyadarshini Institute of Technology & Science for Womenâ€™s

:NOT ASSIGNED

Abstract

In recent times networks are increasing wide and more compound. Yet administrator use tools like ping and sketch route to repair problems. Consequently we proposed a Usual and systematic approach for testing and debugging system called Automatic Test Packet Creation. This loom gets router configurations and generates a machine-independent model. ATPC generate a few set of test packets to find every link in the network. Test packets are forwarded frequently and it notice failures to pinpoint the fault. ATPC can detect both functional and feat (throughput, latency) problems. We found, less number of test packets is enough to assessment all rules in networks. For paradigm, 5000 packets can cover all rules in Stanford backbone network, while 63 are much enough to cover all links.

Citation

L.Sravanthi,B.RanjithKumar."A Survey on Fault Identification Using Automatic Test Packet Generation". International Journal of Computer Engineering In Research Trends (IJCERT) ,ISSN:2349-7084 ,Vol.2, Issue 10,pp.871-874, October- 2015, URL :https://ijcert.org/ems/ijcert_papers/V2I1015.pdf,

Keywords : Fault Localization, Test Packet Selection, Network Debugging, Forwarding Information Base (FIB).

References

[1] Hongyi Zeng, Member, IEEE, Peyman Kazemian, Member, IEEE, George Varghese, Member, IEEE, Fellow, ACM, and Nick McKeown, Fellow, IEEE, ACM, â€œAutomatic Test Packet Generationâ€.  
[2] M. Jain and C. Dovrolis, â€œEnd-to-end available bandwidth: Measurement methodology, dynamics, and relation with TCP throughput,â€ IEEE/ACM Trans. Netw., vol. 11, no. 4, pp. 537â€“549, Aug. 2003. 
[3] Kompella, R. R., Greenberg, A., Rexford, J., Snoeren, A. C., and Yates, J. Cross-layer Visibility as a Service. In Proc. Of fourth workshop on Hot Topics in Networks (HotNet-IV) (2005). 
[4] D. Maltz, G. Xie, J. Zhan, H. Zhang, G. Hjalmtysson, and A. Greenberg. Routing design in operational networks: A look from the inside. In Proc. ACM SIGCOMM, 2004. 
[5] Mark Stemm, Randy Katz, Srinivasan Seshan, â€œA network measurement architecture for adaptive applicationsâ€, In Proceedings of the nineteenth Annual Joint Conference of the IEEE Computer and Communications Societies, pp. 285 - 294, 2000.
 [6] Verma, D. Simplifying Network Administration using Policy based Management. IEEE Network Magazine (March 2002). 
[7] P. Yalagandula, P. Sharma, S. Banerjee, S. Basu, and S.-J. Lee, â€œS3: A scalable sensing service for monitoring large networked systems,â€ in Proc. INM, 2006, pp. 71â€“ 76.

DOI Link : NOT ASSIGNED

Download :

V2I1015.pdf

Refbacks : Currently there are no Refbacks

Announcements

Authors are not required to pay any article-processing charges (APC) for their article to be published open access in Journal IJCERT. No charge is involved in any stage of the publication process, from administrating peer review to copy editing and hosting the final article on dedicated servers. This is free for all authors.

News & Events

Latest issue :Volume 10 Issue 1 Articles In press

A plagiarism check will be implemented for all the articles using world-renowned software. Turnitin.

Digital Object Identifier will be assigned for all the articles being published in the Journal from September 2016 issue, i.e. Volume 3, Issue 9, 2016.

IJCERT is a member of the prestigious.Each of the IJCERT articles has its unique DOI reference.
DOI Prefix : 10.22362/ijcert

IJCERT is member of The Publishers International Linking Association, Inc. (“PILA”)

Emerging Sources Citation Index (in process)

IJCERT title is under evaluation by Scopus.

Key Dates

☞ INVITING SUBMISSIONS FOR THE NEXT ISSUE :

☞ LAST DATE OF SUBMISSION : 31st March 2023

☞ SUBMISSION TO FIRST DECISION : In 7 Days

☞ FINAL DECISION : IN 3 WEEKS FROM THE DAY OF SUBMISSION

Important Announcements

All the authors, conference coordinators, conveners, and guest editors kindly check their articles' originality before submitting them to IJCERT. If any material is found to be duplicate submission or sent to other journals when the content is in the process with IJCERT, fabricated data, cut and paste (plagiarized), at any stage of processing of material, IJCERT is bound to take the following actions.
1. Rejection of the article.
2. The author will be blocked for future communication with IJCERT if duplicate articles are submitted.
3. A letter regarding this will be posted to the Principal/Director of the Institution where the study was conducted.
4. A List of blacklisted authors will be shared among the Chief Editors of other prestigious Journals
We have been screening articles for plagiarism with a world-renowned tool: Turnitin However, it is only rejected if found plagiarized. This more stern action is being taken because of the illegal behavior of a handful of authors who have been involved in ethical misconduct. The Screening and making a decision on such articles costs colossal time and resources for the journal. It directly delays the process of genuine materials.

Citation Index

Citations Indices	All
Citations	1026
h-index	14
i10-index	20
Source: Google Scholar

Acceptance Rate (By Year)

Acceptance Rate (By Year)
Year	Rate
2021	10.8%
2020	13.6%
2019	15.9%
2018	14.5%
2017	16.6%
2016	15.8%
2015	18.2%
2014	20.6%

 Conference Proposal

 Peer Review

 Digital Library

 Register here

 Conference Proposal

 Special Issue Proposal

 Conference Proposal Guidelines

 Upcoming Conference

DOI:10.22362/ijcert

Welcome to IJCERT