Impact Factor:6.549
 Scopus Suggested Journal: UNDER REVIEW for TITLE INCLUSSION

International Journal
of Computer Engineering in Research Trends (IJCERT)

Scholarly, Peer-Reviewed, Open Access and Multidisciplinary


Welcome to IJCERT

International Journal of Computer Engineering in Research Trends. Scholarly, Peer-Reviewed,Open Access and Multidisciplinary

ISSN(Online):2349-7084                 Submit Paper    Check Paper Status    Conference Proposal

Back to Current Issues

A Micro-Controller Web Based Design for 3D Intelligent Multi Axis Printer

Sherif Kamel Hussein Hassan Ratib, , , ,
Affiliations
Associate Professor- Department of Communications and Computer Engineering, October University for Modern Sciences and Arts, Giza, Egypt Head of Computer Science Department Arab East Colleges – Riyadh- KSA
:10.22362/ijcert/2018/v5/i9/v5i902


Abstract
The main objective of the paper is to propose a new design for microcontroller web based 3D printer. In particular, the aim is to design a board which holds these parts, Arduino , Raspberry Pi microcontrollers and power electronics. The technology of the Fused Diffusion Modelling (FDM ) will be applied in the design .The newly proposed system will be used to improve the current design and solve overheating problems that present in these devices. A flexible3D printer design is proposed in this paper to provide the user with a real control and video monitoring through a browser from anywhere. The Implementations based on having a reduced size computer Raspberry Pi which could replace a PC and printer server integrated in printer case with all benefits generated such as the Mobility. So, by adding such helpful features, the 3D printer will deliver more flexibility in use to the end user and it pretends to do it at more affordable pricing to bring this new technology to a larger number of users and to everyday uses.


Citation
Sherif Kamel Hussein Hassan Ratib (2018). A Micro-Controller Web-Based Design for 3D Intelligent Multi-Axis Printer. International Journal of Computer Engineering In Research Trends, 5(9), 212-215. Retrieved from https://doi.org/10.22362/ijcert/2018/v5/i9/v5i902


Keywords : Fused Deposition Modelling (FDM), Pulse Width Modulation (PWM), Computer-Aided Design (CAD), STL (Stereo Lithography), SLS (Selective Laser Sintering)

References
[1] Arduino Web Page,[Consulted: 9th February 2014], http://arduino.cc/.
[2] Custom Part Net [On-line]. Olney. [Consulted: 10th February2014]. .http://www.custompartnet.com/
[3] Fundació CIM [On-line]. Barcelona [Consulted: 13rd February 2014]. http://www.fundaciocim.org/es
[4] RepRap_Project http:://en.wikipedia.org/wiki/.Contour Crafting, http://www.contourcrafting.org/
[5] Tom’s Hardware “Giant 3D Printer Builds Homes in   20hours”,8August2012,http://www.tomshardware.co.uk/3D-Printer-Homes-housing-printing,news-39380.html.
[6] “A Huge 3D Printer Can Build A Custom, Enviro-               Friendly House In 20 Hrs,” THE9BILLION, 15 August                                                                                                                                                                                                                                                                                                                                                                                                            2012.http://www.the9billion.com/ 
[7] Wohler’s Report 2011, “Additive Manufacturing and 3D Printing State of the Industry”, p. 242. http://www.wohlersassociates.com/2011contents.htm
[8]  John E. Barnes et al., “Evaluation of Low Cost Titanium Alloy Products,” Materials Science Forum, April 2009, vols 618-619, p. 165. http://www.scientific.net/MSF.618-619.165
[9] “Personal Manufacturing Chemical & Engineering News”,14November2011.http://cen.acs.org/articles/89/i46/Personal-Manufacturing.html


DOI Link : https://doi.org/10.22362/ijcert/2018/v5/i9/v5i902

Download :
  V5I902.pdf


Refbacks : Currently there are no refbacks

Announcements


Authors are not required to pay any article-processing charges (APC) for their article to be published open access in Journal IJCERT. No charge is involved in any stage of the publication process, from administrating peer review to copy editing and hosting the final article on dedicated servers. This is free for all authors. 

News & Events


Latest issue :Volume 10 Issue 1 Articles In press

A plagiarism check will be implemented for all the articles using world-renowned software. Turnitin.


Digital Object Identifier will be assigned for all the articles being published in the Journal from September 2016 issue, i.e. Volume 3, Issue 9, 2016.


IJCERT is a member of the prestigious.Each of the IJCERT articles has its unique DOI reference.
DOI Prefix : 10.22362/ijcert


IJCERT is member of The Publishers International Linking Association, Inc. (“PILA”)


Emerging Sources Citation Index (in process)


IJCERT title is under evaluation by Scopus.


Key Dates


☞   INVITING SUBMISSIONS FOR THE NEXT ISSUE :
☞   LAST DATE OF SUBMISSION : 31st March 2023
☞  SUBMISSION TO FIRST DECISION :
In 7 Days
☞  FINAL DECISION :
IN 3 WEEKS FROM THE DAY OF SUBMISSION

Important Announcements


All the authors, conference coordinators, conveners, and guest editors kindly check their articles' originality before submitting them to IJCERT. If any material is found to be duplicate submission or sent to other journals when the content is in the process with IJCERT, fabricated data, cut and paste (plagiarized), at any stage of processing of material, IJCERT is bound to take the following actions.
1. Rejection of the article.
2. The author will be blocked for future communication with IJCERT if duplicate articles are submitted.
3. A letter regarding this will be posted to the Principal/Director of the Institution where the study was conducted.
4. A List of blacklisted authors will be shared among the Chief Editors of other prestigious Journals
We have been screening articles for plagiarism with a world-renowned tool: Turnitin However, it is only rejected if found plagiarized. This more stern action is being taken because of the illegal behavior of a handful of authors who have been involved in ethical misconduct. The Screening and making a decision on such articles costs colossal time and resources for the journal. It directly delays the process of genuine materials.

Citation Index


Citations Indices All
Citations 1026
h-index 14
i10-index 20
Source: Google Scholar

Acceptance Rate (By Year)


Acceptance Rate (By Year)
Year Rate
2021 10.8%
2020 13.6%
2019 15.9%
2018 14.5%
2017 16.6%
2016 15.8%
2015 18.2%
2014 20.6%

Important Links



Conference Proposal




DOI:10.22362/ijcert