Impact Factor:6.549
 Scopus Suggested Journal: UNDER REVIEW for TITLE INCLUSSION

International Journal
of Computer Engineering in Research Trends (IJCERT)

Scholarly, Peer-Reviewed, Open Access and Multidisciplinary

Welcome to IJCERT

International Journal of Computer Engineering in Research Trends. Scholarly, Peer-Reviewed,Open Access and Multidisciplinary

ISSN(Online):2349-7084                 Submit Paper    Check Paper Status    Conference Proposal

Back to Current Issues

Optimized control of Induction Heating System

Mrs. Asawari Dudwadkar , Dr. (Mrs.) Sayle Gha, , ,
JJT University, Rajasthan, Asst. Prof., VESIT,Mumbai, India

In this paper a simple power and frequency control scheme is proposed for high power/high frequency Induction heating for Typical Heavy Industrial Applications like Induction Welding & Annealing which require operating on 100 kW / 100 kHz. The Proposed PI controller controls the load parameter values of R and L and thereby controls the resonance frequency of the whole model. The control scheme has the advantages of not only wide power regulation range but also ease of control output power. Also, it can achieve the stable and efficient Zero-Voltage-Switching in whole load range. The proposed method is described in detail and its validity is verified through simulink model. The model achieves proper power control for load ranging from 80 kW to 100kw.

Mrs. Asawari Dudwadkar , Dr. (Mrs.) Sayle Gharge, “Optimized control of Induction Heating System”, International Journal Of Computer Engineering In Research Trends, 4(1):67-71, January-2017. [InnoSpace-2017:Special Edition]

Keywords : Induction heating, power control, PI controller

[1] N. Mohan, T.M.Undeland, W.P.Robbins, “Power Electronic-Converters, Applications and Design", Second edition, John Wiley & Sons Inc., 1995.

[2]   O. Lucía, O. Jiménez, L. A. Barragán, I. Urriza, J. M
Burdío and D. Navarro, "System-on-programmable-           chip-based versatile modulation architecture applied to domestic induction heating," Industrial electronics, 2009. IECON '09. 35th Annual Conference of IEEE, Porto, 2009, pp. 2880-2885

[3] N. S. Bayindir, O. Kukrer and M. Yakup, "DSP-based PLL-controlled 50-100 kHz 20 kW high-frequency induction heating system for surface hardening and  welding applications," in IEE Proceedings – Electric Power Applications, vol. 150, no. 3, pp. 365-371,May 2003.

[4] J. Martis and P. Vorel, "Apparatus for induction heating 2.5 kW using a series resonant circuit," Mechatronics - Mechatronika (ME), 2014 16th International Conference on, Brno, 2014, pp. 130-135.

[5] T. Mishima, C. Takami and M. Nakaoka, "A New          Current Phasor-Controlled ZVS Twin Half-Bridge High-Frequency Resonant Inverter for Induction  Heating," in IEEE Transactions on Industrial Electronics, vol. 61, no. 5, pp. 2531-2545,May2014.

[6]   A. Amrhein and J. S. J. Lai, "A transformer-coupled,          Series-resonant topology for the induction heating of          aluminum cookware," 2015 9th International          Conference on Power Electronics and ECCE Asia          (ICPE-ECCE Asia), Seoul, 2015, pp. 1234-1239.

[7]   B. Saha and R. Y. Kim, "High Power Density Series          Resonant Inverter Using an Auxiliary Switched           Capacitor Cell for Induction Heating Applications,” In IEEE Transactions on Power Electronics, vol. 29   No. 4, pp. 1909-1918,April2014.

 [8] V. Esteveet al., "Improving the Reliability of             Series Resonant Inverters for Induction Heating             Applications," in IEEE Transactions on Industrial             Electronics, vol. 61, no. 5, pp. 2564-2572, May 2014. 

DOI Link : NA

Download :

Refbacks : There are currently no refbacks


Authors are not required to pay any article-processing charges (APC) for their article to be published open access in Journal IJCERT. No charge is involved in any stage of the publication process, from administrating peer review to copy editing and hosting the final article on dedicated servers. This is free for all authors. 

News & Events

Latest issue :Volume 10 Issue 1 Articles In press

A plagiarism check will be implemented for all the articles using world-renowned software. Turnitin.

Digital Object Identifier will be assigned for all the articles being published in the Journal from September 2016 issue, i.e. Volume 3, Issue 9, 2016.

IJCERT is a member of the prestigious.Each of the IJCERT articles has its unique DOI reference.
DOI Prefix : 10.22362/ijcert

IJCERT is member of The Publishers International Linking Association, Inc. (“PILA”)

Emerging Sources Citation Index (in process)

IJCERT title is under evaluation by Scopus.

Key Dates

☞   LAST DATE OF SUBMISSION : 31st March 2023
In 7 Days

Important Announcements

All the authors, conference coordinators, conveners, and guest editors kindly check their articles' originality before submitting them to IJCERT. If any material is found to be duplicate submission or sent to other journals when the content is in the process with IJCERT, fabricated data, cut and paste (plagiarized), at any stage of processing of material, IJCERT is bound to take the following actions.
1. Rejection of the article.
2. The author will be blocked for future communication with IJCERT if duplicate articles are submitted.
3. A letter regarding this will be posted to the Principal/Director of the Institution where the study was conducted.
4. A List of blacklisted authors will be shared among the Chief Editors of other prestigious Journals
We have been screening articles for plagiarism with a world-renowned tool: Turnitin However, it is only rejected if found plagiarized. This more stern action is being taken because of the illegal behavior of a handful of authors who have been involved in ethical misconduct. The Screening and making a decision on such articles costs colossal time and resources for the journal. It directly delays the process of genuine materials.

Citation Index

Citations Indices All
Citations 1026
h-index 14
i10-index 20
Source: Google Scholar

Acceptance Rate (By Year)

Acceptance Rate (By Year)
Year Rate
2021 10.8%
2020 13.6%
2019 15.9%
2018 14.5%
2017 16.6%
2016 15.8%
2015 18.2%
2014 20.6%

Important Links

Conference Proposal